Adiabatic condensers
Adiabatic condensers / liquid coolers
This system works by spraying water directly over the finned surface by means of special nozzles regularly distributed along the coil surface, allowing an enhancement of the unit capacity on the hottest days of the season.
PA series
Water Spray Sytem. This system works by spraying water directly over the finned surface by means of special nozzles regularly distributed along the coil surface, allowing an enhancement of the unit capacity on the hottest days of the season. Option available for condenser ranges VC, VE and CB and liquid coolers ranges VL and AL.
ADVANTAGES
-
Size and costs reduction. In summer, operating with wet coil, the adiabatic cooling of the ambient air
increases the capacity and therefore the unit size is smaller than the standard model working
always dry. -
Low water consumption, since the unit is wet operated only in summer or during the hottest midday
hours and because it is sprayed only the water the coil is able to take in, without water loss or
accumulation. -
Low water pressure spraying nozzles, between 1 and 6 bar, therefore the system is prepared to work
with normal city mains water pressures and there is no need of a water pumping system to reach
the required pressure.